3L Spray Dryer Our Lab Use Stainless Steel Material Small Volume for Milk Liquid

• After-sales Service: One Year Remote Warranty Service
• Warranty: One Year Remote Warranty Service
• Heating Mode: Transmission
• Material Status: Powder, Solution, Bulk
• Atomization: Gas Atomization
• Flow: Contra-Flow
• Model NO.: TPS-3
• Heat Source: Electricity
• Trademark: TOPTION
• Origin: Xi′an Shangxi China

Product Description

Products Description
spray dryer is a kind of continuous atmospheric dryer.Use pneumatic or electric atomization device to make liquid high-speed centrifugal spray as fog droplet, make these fog droplet contact with the hot air in the drying chamber and instantaneous drying.

Model	TP-S15	TP-S30	TP-S50	TP-S100
Max capacity	1500-2000 ml/h	3000 ml/h	5000 ml/h	10000 ml/h
Temperature range of inlet air	40ºC ~ 300ºC	30ºC ~ 300ºC	140°C ~ 300°C	50°C ~ 300°C
Temperature range of outlet air	40ºC ~ 140ºC	30ºC ~ 140ºC	80°C ~ 90°C	30°C ~ 150°C
Spray system	Two-fluid nozzle	Centrifugal nozzle	Centrifugal nozzle	Centrifugal nozzle
Precision of temp	±1 ºC
Dryer time	1.0 ~ 1.5 S
Speed of squirt pump	50 ~ 2000	3000	5000	10000
Spray direction	Downwards co-current
Heater Power	3KW 220V
Total power	10KW 380V
Heat source	Electric

 

Product process

1. After the air passes through the filter and the heating device, it enters the hot air distributor on the top of the drying room, and the hot air passing through the hot air distributor evenly enters the drying room and rotates in a spiral shape.

2. At the same time, the material liquid is sent to the centrifugal spray head (atomizer)  installed at the top of the drying chamber, and the material liquid is sprayed into performance mist droplets.

3. The contact surface area of the material liquid and the hot air is greatly increased, and the water evaporates quickly, and the finished product is dried in a very short time.

4. The powder is recovered by the collection tube at the bottom of the dryer, and the exhaust gas is discharged by the centrifugal fan.

Product advantages

1. Stainless steel material, arc corner design and polyester powder coated shell, prevents corrosion of acidity and alkaline air effectively.
2. Imported  electrical components which is more stability.
3. PLC control system, make your research more easier and efficient.
4. Build in oil-free air compressor, without any noise.
5. Self-priming peristaltic pump, avoid secondary pollution, make sure whole process conducted steady and smoothly.
6. Narrow size distribution, more than 95% of the dry powders are in the same range of particles.
7. Innovative tower wall purging device, improves the material recycling rate.
8. High speed of drying, after spraying of the material liquid, the surface area of material will be increased greatly, make your research more efficient.
9. In the hot-air flow, 95%~98% of water can be evaporated at a moment. You can finish material drying only in several seconds.
10. Especially suitable for drying the heat sensitive materials, after drying, there's no need for smashing and sorting, so as to reduce the operation procedures and save your time.

Customer case

Exhibition

Packing and feedback